當我用想輸出60FPS的MOV檔案時,原本3秒的影像在輸出後卻只成功輸出了1秒。
轉換成30FPS輸出時就不會有問題,我有試過更改縮放輸出的影像尺寸,壓縮 等條件,只有將FPS改為30時才能成功輸出完整的影像,之前沒有發生過這種狀況。
當我用想輸出60FPS的MOV檔案時,原本3秒的影像在輸出後卻只成功輸出了1秒。
轉換成30FPS輸出時就不會有問題,我有試過更改縮放輸出的影像尺寸,壓縮 等條件,只有將FPS改為30時才能成功輸出完整的影像,之前沒有發生過這種狀況。
Fuyushima 您是否在播放视图中更改了时间线的 FPS
?如果是这样的话,回放速度就会改变,从而缩短视频时间,但如果你改变的只是导出对话框中的 FPS 选项,那就太奇怪了。如果将时间轴 FPS
设置为 30 仍然会导致视频时间缩短,能否请您将 Spine 项目通过电子邮件发送给我们,以便我们重现该问题?contact@esotericsoftware.com
Did you change the Timeline FPS
in the Playback view? If that were the case, the playback speed would change and thus shorten the video time, but if all you are changing is the FPS option on the export dialog, that would certainly be weird. If setting the Timeline FPS
to 30 still results in a shorter video time, could you please send the Spine project to us via email so that we can reproduce that issue?: contact@esotericsoftware.com
不好意思,發現問題為60FPS時輸出動畫時間軸範圍要2倍,不知道有沒有辦法能只參照時間軸而不參照FPS
你好,
可以肯定的是,您的播放視圖中設置了多少 FPS?
任何項目都會出現這種情況還是僅此項目會出現這種情況?
這種情況是僅在安裝的 Spine 上發生還是在其他計算機上也發生?
http://zh.esotericsoftware.com/spine-playback
Hello,
To be sure, what FPS are set in your playback view?
Does this happen with any project or just this project?
Does this happen only on this installation of Spine or also on other computers?
Erika
謝謝回覆,我的playback設置FPS為30的時候,輸出FPS為60就需要設定2倍的影格範圍。
在其他的電腦安裝也是同一設定會出現同一情形,現在問題已經解決,下一專案就會使用60FPS的playback設定。
Fuyushima 啊,有道理!是 影格 - 範圍
设置出了问题。没错,由于帧数会随着 60FPS 的增加而增加,因此必须相应修改 影格 - 範圍
设置,否则输出的视频播放时间会缩短。抱歉,我在您分享的第一张截图中没有注意到这一点。很高兴您能解决这个问题。
Ah, that makes sense! It was the Frames - Range
setting that was causing it to go wrong. That's right, because the number of frames increases with 60FPS, the Frames - Range
setting must be modified accordingly, otherwise the exported video will be output with a shorter playback time. Sorry I didn't notice it in the first screenshot you shared. I'm glad you were able to resolve it.